Important: The instructions below apply to standard HP (Hewlett-Packard) series printers. Always disconnect power cables before reaching inside internal paper paths or hardware assemblies.
Recommended Resolution Steps
- 1
Power down the printer using the main switch, wait at least 30 seconds, and turn the unit back on.
- 2
Open the front and right-side access panels to remove and carefully reseat the Intermediate Transfer Belt (ITB) assembly.
- 3
Slide out each toner cartridge and reinsert it firmly until it locks into position.
- 4
Inspect the fuser drive gear area for torn paper fragments or packaging debris.
- 5
If the 59.F0 code returns after rebooting, the transfer belt sensor or fuser drive motor likely requires service.